0086 13930718883
   Room 1001-1002,Taida Square, Yingbin road,Cangzhou,Hebei,China
Home » Products » KN95
Product Description

Self-priming Filter-type Anti-particulate Respirator

Disposable Face Mask (Respirator) Without Breathing Valve


Restrictions and Warnings

1. Before using this protective mask,you should first receive training for proper use and inspection on fitness

2. This protective mask should not be used when the concentration of pollutants reaches a level of immediate life threatening or heath harming

3. Leave the contaminated area immediately when you have breathing problems,dizziness,or other discomfort

4. Replace the protective mask with a new one when it has been damaged or the breathing resistance becomes larger

5. Inspect the protective mask before each use to ensure that it is in good working order, inspect all parts of this protective mask, including the two ear belts,nose clip and studs,for signs of damage.

6. Do not modify ,clean, abuse or misuse this protective mask

7. Do not use this protective mask if the beard, facial hair or other facial features hinder a good closeness between the face and edge of the mask

8. Use the mask within the limits of applicable policies and regulations

9. Failure to follow the instructions and warnings during the use of the protective mask,and or failure to wear the protective mask throughout the entire process of exposure to pollutants,will reduce the effectiveness of the protective mask and cause illness, or cause permanent harm to health



This product is only for respiratory protection against certain particulates.Misuse can cause illness or even death, For correct usage,see the instruction on the package


Storage conditions and expiration date


The unopened product shall be valid for 5 years from the production date under the condition that the storage temperature is within the range of -20 to +- 30 and the relative humidity is less than 80%

This product dose not contain ingredients of natural rubber



1. Face the face of the mask without the nose clip,and pull the are belts on side with both hands so that the nose clip can be above the mask

2. Put the mask on your chin

3. Pull the ear belt to the back of the ear belt to feel comfortable

4. Place the fingers of both hands in the middle of the metal nose clip.Using only one have to pinch the nose clip of the mask may affect the closeness of the mask

5. Before entering the work area,the user must check the closeness between the mask and the face

(1) Cover the mask with both hands to avoid affecting the position of the mask

(2) Place both hands completely over the respirator and exhale sharply to check the respirator-to-face seal ,

(3) if are leaks around nose,readjust the nosepiece as described in step3. If air leak at respirator edges,work the straps back along the sides of your head


Protection against all kinds of dust and mist generated by mechanical force during the processing of coal.


Painting and sandblasting,it cannot be sued for protection against.




  0086 13930718883
   Room 1001-1002,Taida Square, Yingbin road,Cangzhou,Hebei,China


©Hebei Jincheng Information Technology Co.,Ltd